10.12.22
For the River Towers HVAC Revitalization and Remediation project, Harris was the general contractor with multiple subcontractors direct with the owner. The project was design-build with mechanical, electrical, structural and architectural scope of work. The project consisted of condos with (2) towers, one 30 stories and the other 18 stories. There were also boilers, snowmelt, pool heating, plumbing heating and a 200-foot lattice flue structure up through the center of the building. This was an HVAC retrofit project that also ...
Read More 10.04.22
Harris was selected by Layton Construction and Argent Group as the design-builder for the mechanical and plumbing work on the new, Innovation Pointe development. This development consists of a 40-acre master plan with 600,000-square feet of development.
The Innovation Pointe 2 project was a five-story, 141,000-square-foot office building with supporting parking structure. It was designed with the needs of today’s businesses in mind, with leading edge technology and high-end finishes.
With the modern progressive architecture ...
Read More 07.30.20
Harris Service recently completed the change out of a 130-Ton Air Cooled Chiller on the US Bank Center Place building in Rochester, MN. This was a Design-Build project with Harris being the prime contractor.
Harris’ scope of work consisted of demoing one of two existing chillers and installing a new chiller prior to summer cooling needs in the building. This work involved demo and modification of existing piping and installation of new isolation valves so that the ...
Read More 03.22.18
Harris was selected by Sage Hospitality to replace the existing swimming pool energy recovery ventilator (ERV) within the hotel which was installed in 1988. The purpose of the ERV is to exhaust the warm, humid chlorinated air and supply fresh, dehumidified outside air to keep the pool environment comfortable for guests. Using a fixed-plate heat exchanger to move energy from one airstream to another, the ERV decreases the amount of cooling and heating needed to condition the incoming fresh air.
Read More 03.22.18
Harris was selected to assist Great Wolf Resorts transition a 433,000-square foot, 403-room resort and water park from construction to close-out. Harris’ work included inspection and repair of HVAC units in guest rooms and as needed in common areas to assure proper and reliable operation of all HVAC equipment.
Harris met project challenges by working extended hours to meet room demands and provide the hotel staff flexibility to meet customer demand. The project scope was expanded to ...
Read More 01.18.17
Harris provided and installed the mechanical equipment and condensate piping for the Phoenix Union Coding Academy. This new, 40,693-square foot school contains classrooms, maker’s lab, divided classroom with moveable walls, two labs and a full gym/cafeteria.
The project included several specialty features which Harris was able to install successfully. For the lab spaces, Harris installed stainless steel lab exhaust ductwork and performed the welding in-place. Some areas required grease ductwork. The gym and maker’s ...
Read More 01.13.17
Harris helped American Airlines renovate their office and data center to adjust to changing business needs. Construction took place in four phases to accommodate the occupants.
One phase of the project scope included removal of seven existing fluid cooler fan sections and replacing them with new fan sections. This work had to be scheduled with the owner so that at least two existing fluid coolers and a redundant cooler were always online. The owner’s data center ...
Read More 01.13.17
This project included the renovation of the existing East Valley Bus Operations Center. Scope of work included removing and replacing 34 existing under-floor air distribution terminal boxes located in the administration building. This work was completed in phases to accommodate staff working in the building during construction.
Scope also included overhead work to install four new supply air ducts and new controls for the under-floor terminal units. All units were tied in to existing BAS and test and ...
Read More 05.25.16
Twin Arrows Casino Resort is a five-story, 110-room, 71,630-square foot hotel addition with a 7,548-square foot spa. Harris performed installation of HVAC equipment including a 500-ton air cooled chiller and boiler, outside air and exhaust risers and a vertical and horizontal fan coil unit. Included among the plumbing installations were hot water and chilled water mechanical piping, domestic hot water re-circulation, pump, mixing valve, booster pump, water heaters and a hot water storage tank. Steel was used for mechanical ...
Read More 04.28.16
La Paz Regional Hospital’s new, 9,158 square foot surgical addition provides two surgical suites for major operations and two procedure suites for minor operations. The building was designed to create an open yet efficient work space, allowing patients to flow smoothly between areas while maximizing the number of people using the facility.
Harris Mechanical Southwest provided the complete plumbing and medical systems for the addition. The project required multiple shutdowns of the existing hospital’s facilities in ...
Read More 